What to Do About Peeling Paint Work

Published On August 29, 2019 | By David Standridge | Home improvement

With the extreme climate of Australia, from the chilly winters to the scorching summers, it’s no wonder why paint starts peelingoff houses so frequently. But there are things you can do to improve the aesthetics of your home when it comes to peeling paint. Residential painters in Toorak and greater Melbourne know these hints for dealing with peeling paintwork, some of which will be explored below in this article.

If you want to leave the job to professionals, you can call house painters in Toorak and surrounds to fix the problem for you. But if you would prefer to save some money, it’s easy enough to take the 6 steps outlinedbelow for peel-free paint.

 Step 1 – Determine Why the Paint is Peeling

Finding out why your paint is peeling is an important first step. It could be due to a variety of factors. Excess humidity isone reason for peeling paint, and a dirty painting surface is another. If acrylic paint is painted over oil paint, it will most likely peel as well. Knowing why your paint is peeling can help you know how to resolve the problem and also help you to avoid that problem in the future.

 Step 2 – Prepare Your Area

When you’re trying to fix peeling paint, there are safety precautions that should be taken note of. You’ll need to wear a safety mask, safety glasses and protective gloves. This is because you might come across lead and paint particles, splintered wood, or toxic fumes. Use a plastic sheet to protect your carpet or flooring, and move furnishings to another room to keep them clean.

 Step 3 – Clean & Prepare the Paint Surface

Take your paint scraper and scrape away all the peeling paint. Next,use a wire brush and sweep up the scraped part of the surface. Be careful to make sure you cover the edges of the peeling paint, and if your wall peels again, use the scraper before returning to your surface with your wire brush. Continue until it stops peeling.

 Step 4 – Repair the Surface

After scraping away the peeling paint, you’ll be able to see the wall surface clearly. Are there any cracks or holes? You’ll need to fill these with filler and a putty knife. Make sure you choose a flexible putty knife for the best results. Leave your filler to dry as per manufacturer instructions.

Step 5 – Create a Smooth Surface

Select fine grit sandpaper – it could be manual or electric – and use it to smooth out lumps and bumps and bits of excess filler. Try not to press too hard, as you need to maintain the right level of filler so that your cracks and holes don’t reappear. If you do press too hard, you’ll need to do the previous three steps again before proceeding.

Step 6 – Prime & Paint

Your surface is now ready for priming and painting! Make sure you prime your wall first, and let the coat of paint dry thoroughly. The primer will protect your surface and allow for better adhesion of the paint to the wall. For the best results, read and follow the instructions on the tins of primer and paint. Often, more than one coat of paint is necessary. It’s better to apply multiple coats of thin paint that to add your paint too thickly all at once.

Following these steps should provide good results for peeling paint, but if you’d prefer to leave it to the experts, you can contact residential painters in Toorak and surrounds for their help and expertise.

 

Like this Article? Share it!

About The Author

Comments are closed.